Free delivery on orders over UAH 7,000

Specifications

Supplier	Omega
Category	Medical chairs
Technical data	Chair height above the floor in the horizontal position of the bed: – 900 mm Chair height above the floor in the vertical position of the backrest: – 1700 mm Seat width of the chair: – 580 mm Seat width along the guide rails: – 630 mm. Backrest width of the chair: – 565 mm. Backrest tilt angle relative to the seat: – 0 – 80 Seat tilt angle: – 0˚/+20˚ Length of the chair panel in the unfolded position: – 1280 mm Longitudinal tilt (Trendelenburg): – 20˚ Load capacity of the chair: – 150 kg Weight: – 70 kg Maximum allowable load on the chair – no more than 150 kg. Average service life before decommissioning, years – 10. Gynecological chair KG-1m Alisa TM OMEGA The gynecological chair is designed for gynecological examinations, manipulations, as well as minor surgical interventions in specialized hospital and clinic offices. Construction of the gynecological chair. The basis of the construction is a reliable welded frame made of thick-walled shaped metal pipe and a base with a wide base. The design of the supporting part confidently withstands even excessive loads and makes the chair stable and static. The chair is installed on four adjustable supports that allow it to be reliably leveled horizontally and compensate for floor irregularities. Control. The tilt of the seat and backrest, and their fixation in the desired position, is carried out using pneumatic elements, controlled by levers located on the side of the body. The design of the gynecological chair allows the seat and backrest to be fixed at the desired angle. The bed of the chair can be set in a horizontal position, as well as in the Trendelenburg position. Leg holders. Ergonomic seamless Hepel supports made of polyurethane foam, the design of which prevents the patient's legs from slipping during examination or manipulations. The brackets of the supports, locks, and fasteners are made of high-quality stainless steel. The design of the supports allows them to be installed at a convenient height, at any angle, and fixed using a special clamp on a rail with front-back adjustment. Upholstery material of the seat and backrest. The backrest and seat are covered with seamless high-quality vinyl leather with a polyurethane foam lining. The coating allows disinfection with all known antiseptics and is resistant to abrasion and mechanical impacts. Capacity. The chair is equipped with a removable gynecological container made of stainless steel, reinforced on a sliding bracket, which in the non-working position is retracted under the seat. Rails. Specialized universal rails for installing options (infusion stand, supports, fixators, etc.) on both sides of the seat and backrest. Armrests. Have soft ergonomic non-slip polyurethane foam pads and reliable strong attachment to the body. The armrests allow creating an additional support point for the patient if necessary. Body of the gynecological chair. Has a box structure that provides additional strength and load capacity. All metal elements are painted with powder paint resistant to disinfectant solution. Step. A folding step for the patient is made in the front part of the body. Its surface is covered with a special foamed non-slip material. In the unused position, the step folds into the body and does not interfere with the examination. The design of the step mounting brackets is made of strong elements and reinforced on the supporting part of the frame, which allows it to withstand a large weight. Technical specifications: Chair height above the floor in the horizontal position of the bed: – 900 mm Chair height above the floor in the vertical position of the backrest: – 1700 mm Seat width of the chair: – 580 mm Seat width along the guide rails: – 630 mm. Backrest width of the chair: – 565 mm. Backrest tilt angle relative to the seat: – 0 – 80 Seat tilt angle: – 0˚/+20˚ Length of the chair panel in the unfolded position: – 1280 mm Longitudinal tilt (Trendelenburg): – 20˚ Load capacity of the chair: – 150 kg Weight: – 70 kg Maximum allowable load on the chair – no more than 150 kg. Average service life before decommissioning, years – 10. Additional information Color: Beige, Blue, Green, Black

Temporarily unavailable · Omega

Medical chairs