Needle incinerator and syringe destructor MEDTECH DOTS

Product description

Safe and compact desktop device that allows easy disposal of used needles and syringes, thanks to the built-in incinerator and a blade for cutting off the syringe cannula. Manufacturer: MRK HEALTHCARE, India Compared to mechanical needle destruction devices, where needles are cut but remain sharp, infected, and can cause infection in a healthy person, the Nulife DOTS burns the needle, disinfects it, and destroys the syringe. The device is primarily intended for use in laboratory conditions. Operating principle: The needle on the syringe is inserted into the hole on the top surface of the device. The needle closes the upper and the lower electrodes located a short distance away, causing the needle to heat up and begin to melt. The entire process, depending on the length and diameter of the needle, takes 2-3 seconds. The remains of destroyed needles in the form of metal granules are collected in a separate container. When using this device, observe the following precautions: 1) Before connecting the device, check the indicator to ensure the device voltage matches the voltage at your workplace. 2) Never immerse the cord and plug in water. 3) Turn off the device when not in use and before cleaning. 4) Turn off the device before removing the collection tray. 5) Clean the device from above by wiping it only with a soft dry cloth. After removing the collection tray, it must be cleaned and disinfected. 6) If an extension cord is required, use a 5A rated cord. A cord rated for lower amperage may burn out. 7) Place the device so that the cord does not interfere with work. 8) The device is intended only for burning needles from 19g to 31g with subsequent cutting of the syringe cannula. This device is not intended for destroying other metal objects. Do not attempt to destroy glass and metal syringes: this may cause serious damage to the device blade. 9) Do not use the device in the presence of volatile gases and other volatile substances. 10) Do not insert your finger into the device. 11) For better protection, use a fuse matching the device's fuse rating. 12) Do not break the needle with a cutter. 13) Needles thinner than 19g should be burned in another machine. 14) Burn a maximum of 2 needles per minute.