BactoSfera EKRAN Jalousie 30×2

Product description

Room area: Up to 60 m² Purpose: Air Fans: None Removable top cover: Yes Lamp: 2×30 W 9000 hours UV power 254 nm: 22,6 W BactoSfera EKRAN Jalousie 30×2 is a professional device for air disinfection in rooms with an area up to 60 m². The device operates on the principle of irradiating the upper part of the room, allowing its use in the presence of staff or visitors. The design includes a system of louvers that direct ultraviolet rays strictly parallel to the floor. The efficiency of this model is enhanced by the possibility of choosing different modifications depending on the needs of a specific facility. For example, an excellent solution for rooms with intense air movement is the shielded irradiator with louvers BactoSfera EKRAN Jalousie 30 FAN, which is additionally equipped with fans for accelerated recirculation. The 30×2 model, in turn, features an additional open lamp for surface sterilization. Operating modes The device is controlled by a switch on the cord or a regular wall switch. The electronic module regulates the lamp operation according to the following algorithm: Mode Action Result 1 mode Single press Only the upper shielded lamp operates 2 mode Double press Program start: delay of 10 seconds and 30 minutes of operation of the lower lamp 3 mode Triple press Simultaneous operation of upper and lower lamps After the automatic cycle in the second mode ends, the lower lamp turns off automatically, and the upper continues to operate. To reset the program, simply turn off the power for two seconds. Spectrum of effect and safety Ultraviolet radiation with a peak at 254 nm destroys the DNA and RNA structure of microorganisms. The device effectively handles the following threats: Influenza viruses of all types. Pathogens of ARVI and coronaviruses. Mold fungi and their spores. Allergens, bacteria, and yeasts. The absorbed radiation dose leads to instant inactivation of pathogens. Meanwhile, the matte black coating of the louvers completely absorbs excess rays, preventing their reflection into the human occupancy zone. Installation and operation require adherence to precise technical parameters: Mounting the housing at a minimum height of 2,2 meters from the floor. Fixing at an angle of 90° to the wall. Use of the open lamp mode exclusively in an empty room. Following these rules allows maintaining air sterility throughout the working day. The device is equipped with ozone-free lamps with a resource of 9 000 hours, so airing after irradiation sessions is not required. Application areas and package contents The device is suitable for integration into various types of spaces: Offices and business centers. Medical institutions and laboratories. Kindergartens and schools. Apartments and private houses. The package includes the irradiator, removable top cover, technical passport, and warranty card. Regular use of BactoSfera EKRAN Jalousie 30×2 helps create a safe environment and reduce the risk of infection transmission in places of mass gatherings. WARNING! The irradiator must be installed on a plane perpendicular to the floor (wall) at a height of 2,2 meters or more from the floor. The lower plane of the irradiator housing must be at an angle of 90° to the wall, i.e., perpendicular to it and accordingly parallel to the floor (it is recommended to check this, for example, with a carpenter's square). It is forbidden to perform work in the upper part of the room while the irradiator is operating; if a person needs to cross the radiation line, turn off the irradiator. * Be sure to read the product passport before use.